i could do the creemore ride or variation of it indeed.
I am will leave around noon - From Thornhill - and go around Oshawa / Port Perry for 5 / 6 hours
Less than 1000km, Not enough aggressive for me. I really like them in everything but sands... And its sandy around GTA where I mostly ride!...
Thanks EmKwynn, Already got it and all my bearing were changed. Everything is much easier with the right tool.
Thanks, I would have hoped for something more affordable but if it is what I need then it is what I need.
I need to remove 2 bearing inside my sprocket support group - ktm 690. The inside of the bearing is 30mm. I cannot get to find which tool to use to...
I asked somebody at OFTR about Victoria Trail, I was told that motorcycle are only permitted
"from Burnt River north, ORM's are not allowed south...
It seems we are north of Bethany before eating.
I will be riding in the Port Perry / Bethany area also this Saturday. I can help if you need.
Planing to go ride tomorrow so I was wondering if anybody rode recently.
Update: I used "liquid Wrench" that I applied 4-5 time with one hour between each application and let the bike down all nite. The next day it was...
In the middle of changing my sprockets / chain, I ran into a stuck rear Axle. I was able to hammer it 2 inches with a mallet but eventually...
Just coming back from 6 days Enduro adventure in Iceland and I can only recommend it as it was amazing. More info at:...
Going Monday finally.
I will be going to BobCaygeon this weekend for one day. I can go on either Sat or Sun. Planning on taking bass Lake trail maybe up to the TCAT. Or...
Graham: It is the 'Explorer' model :
Delorme/Garmin InReach Explorer
I do not have access to SCORRA website anymore... But I think 'Hendrie Forest' would be close for you.
I have a Garmin communicator - InReach that is. Seems to me its more for in the desert. Even in my backyard with trees its hard to get a signal. But...
I will most likely do the 2016 or 2017 Aggressive route this Sunday. I did 2015 last Sunday. It was quite nice.
Separate names with a comma.