Wondering where a good spot in the GTA is? Also, what should this cost? I have a 07 WR 450 and am headed to WEST Virginia April 22nd and don`t want any surprises. Cheers
Get yourself a set of feeler gauges and do it yourself. It is not difficult to check. It is a bit more work if you are out of spec and need to change some shims, but not too difficult if you are careful. You will need a torque wrench to reinstall the cams. You can probably find instructions on thumpertalk.com. Can't recommend a shop in the GTA, but I would estimate no more than two hours labour if the clearances are out of spec. Half that if they are good.
